Newsletter Subscription
Enter your email and we will send you more information
Adaptive MultiEasy Plenum
Adaptive MultiEasy Plenum
The adaptive MutiEasy plenum for Falko OC is the innovative plenum for multi-zone hydronic climate control.
The plenum is equipped with electronic speed control that allows you to modulate the speed of the Falko OC fan and a differential pressure sensor for continuous surveillance of air flow rate
The Preassemnled and pre-Wired Plenum with Shutters
It has multiple air supplies, equipped with thermally insulated butterfly dampers and individually driven by 2 Nm actuators powered at 24 V DC.
The number of supplies varies from 2 to 5 depending on the model, expandable by an additional supply. It has a live output for the control of an optional valve for Falko OC
Wide range to Cover any need
The MultiEasy Plenum is already pre-assembled and wired, with standard supply voltage at 230 V, has a power supply, already mounted on the plenum for the low voltage power supply of the actuators. MultiEasy is available both with dampers in ON/OFF version (open/closed), and with modulating dampers controlled with 0-10V signal. The plenum, made of galvanized sheet metal, is internally thermally insulated, as are the dampers. The pressure calibration can be changed via the on-board selectors, from 10 to 70 Pa, as can be set by means of mechanical stops the minimum and maximum aperture degree of each damper. Due to the height of only 24 cm it can be installed in suspended ceilings.
The Unique Features of Multieasy
For its innovative technical content, MultiEasy is protected by international patents.
The adaptive MultiEasy plenum is a component of the Clima Zone system, which makes it particularly easy to realize a heating and cooling air conditioning system with temperature control for individual thermal zones.
- Advanced Technical Features
- MultiEasy performs the following functions:
- It allows to open and close the dampers individually, with signals from traditional thermostats in dry contact (ON/OFF version), or from thermostats and home automation 0-10 V (such as Vision or Integra Benessere)
Through a pressure sensor, it monitors the flow rates of the channels and acts in modulation on the Falko OC fan, to ensure the optimal flow rate without overpressure or noise. Be placed inside suspended ceilings and mounted directly on the supply mouth of the Falko OC ceiling fancoil - • Controls the Falko OC water supply valve (live output).
- • Allows to calibrate the pressure in the supply plenum, if necessary, in a range from 10 to 70 Pa
• It allows to handle up to 6 dampers, and thus up to 6 thermostats individually. - • Each damper can be mechanically calibrated, to limit both the maximum and the minimum opening.
- • The MultiEasy modulating version can be combined with the Integra Benessere thermodomotics system for multi-zone management from touchscreens and apps.
Dimensions
TECHNICAL DESIGN
| MultiEasy Size | Quota A [mm] |
|---|---|
| MultiEasy for Falko OC 510 | 789 |
| MultiEasy for Falko OC 850 | 935 |
| MultiEasy for Falko OC 1360 | 1'215 |
Technical data
|
Description |
|
MultiEasy Adaptive Plenum |
|---|---|---|
|
Code |
|
|
|
Number of dampers |
- |
Da 2 a 5 (+ 1 opzionale) |
|
Number of independent thermal zones |
% |
Fino a 6 |
|
Signal for shutters ON/OFF |
W |
Dry contact |
|
Signal for modulating dampers |
W |
0 - 10 V |
|
Pressure adjustment range |
Pa |
10 - 70 |
|
Pressure adjustment resolution |
Pa |
1 |
|
Operating air temperature |
°C |
+ 5 / + 70 |
|
Falko OC modulation field |
% |
10% - 100% |
|
Voltage Piloting Water Valve |
V |
230 |
|
Early opening water valve |
min |
4 |
| Adjustable position damper all open | ° | 50 - 90 degrees |
|
Adjustable position damper all closed |
V / ph / Hz |
0 - 30 degrees |
|
Insulation class |
- |
IP 24 |
Headings of specifications
Adaptive plenum for Falko 510 OC fancoils for modulating control of 2 or 3 zones.
Plenum with motorized valves for modulating thermal control of 2/3 zones, adaptable to Falko OC 510 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers 0-10V. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Adaptive plenum for Falko 850 OC fancoils for modulating control of 2/3 /4 zones.
Plenum with motorized valves for modulating thermal control of 2/3 zones, adaptable to Falko OC 850 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers 0-10V. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Adaptive plenum for Falko 1360 OC fancoils for modulating control of 3/4/5 zones.
Plenum with motorized valves for modulating thermal control of 3/4/5 zones, adaptable to Falko OC 1360 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers 0-10V. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Adaptive plenum for Falko 510 OC fancoil for ON/OFF control of 2 or 3 zones.
Plenum with motorized valves for thermal control ON/OFF of 2/3 zones, adaptable to Falko OC 510 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers with dry contact. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Adaptive plenum for Falko 850 OC fancoil for ON/OFF control of 2/3 /4 zones.
Plenum with motorized valves for thermal control ON/OFF of 2/3 zones, adaptable to Falko OC 850 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers with dry contact. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Adaptive plenum for Falko 1360 OC fancoils for 3/4/5 zone ON/OFF control
Plenum with motorized valves for thermal control ON/OFF of 3/4/5 zones, adaptable to Falko OC 1360 hydronic terminal. With pressure control of the flow rate, selectable between 10Pa and 70 Pa, with 1 Pa resolution and electronic control in modulation of the fan speed. Throttle dampers DN 160 thermally insulated, with individually adjustable opening and closing position and operated by actuator with torque of 2 Nm. With possibility of expansion of an additional thermal zone. Control signal dampers with dry contact. Structure in galvanized sheet metal and thermoacoustically insulated. Power supply 230 V.
Download
Download
Scheda tecnica Plenum adattivo MultiEasy
Only registered and logged in users can download this file.
