Newsletter Subscription
Enter your email and we will send you more information
The non-insulated flexible duct is designed to convey air downstream of the heat recovery unit to the air distribution manifolds (when the temperature of the space being crossed is not so low as to produce condensation). The non-insulated flexible duct can be installed inside walls or on the ceiling but is not suitable for burial. For installation in unheated spaces, it is recommended to use insulated ventilation ducts (codes VBNSxx). The non-insulated flexible duct is available in various diameters to connect to all Ideal Clima heat recovery units.
U.M. | DN 125 Cod. VBPV12 |
DN 150 Cod. VBPV15 |
DN 160 Cod. VBPV16 |
DN 180 Cod. VBPV18 |
|
Inner layer | - | Polyvinyl chloride film (PVC) |
Polyvinyl chloride film (PVC) |
Polyvinyl chloride film (PVC) |
Polyvinyl chloride film (PVC) |
Layer thickness | - | 65 micron | 65 micron | 65 micron | 65 micron |
Internal diameter | mm | 127 | 152 | 162 | 182 |
Maximum operating pressure | Pa | 3'000 | 3'000 | 3'000 | 3'000 |
Operating temperature range | °C | -18 +70 | -18 +70 | -18 +70 | -18 +70 |
°C | -18 +70 | -18 +70 | -18 +70 | -18 +70 | |
Minimum bending radius | mm | 500 | 600 | 640 | 720 |
Velocità [m/s] | Airflow [m³/h] | Airflow [m³/h] | Airflow [m³/h] | Airflow [m³/h] |
DN125 | DN150 | DN160 | DN180 | |
0,5 | 22 | 32 | 36 | 46 |
1 | 44 | 64 | 72 | 92 |
1,5 | 66 | 95 | 109 | 137 |
2 | 88 | 127 | 145 | 183 |
2,5 | 110 | 159 | 181 | 229 |
3 | 133 | 191 | 217 | 275 |
3,5* | 155 | 223 | 253 | 321 |
*It is recommended not to exceed 3 m/s of air velocity in the ducts to prevent noise-related phenomena.