Up

Catalogo

Downloads radiante

Up

UP is the active ceiling system proposed for radiant conditioning of buildings, both in heating and cooling. UP ensures exceptional thermo-hygrometric comfort even in hot seasons. The temperature and humidity of the environments, individually adjustable, are pleasantly uniform in every point of each room. The absence of drafts, noisy and cold, further enhances the feeling of well-being.

interior modern living 1224037 99637528

UP is characterized by:

High thermal yields, certified according to EN 14240 and EN 14037
Low thermal inertia and rapid system response.
Easy installation, thanks to UP active modules and the hydraulic connection system with quick couplings.
Minimal footprint, which can be as little as 6 cm from the slab if installed flush with it.
Quiet and completely invisible

Overview

The active ceiling panel 'UP' consists of a 12.5 mm thick plasterable gypsum board, in which the hydraulic circuit is embedded. The panel is insulated against thermal losses with a 30 mm thick layer of expanded polystyrene, which also contributes to increasing the acoustic insulation of the environment. The hydraulic circuit is made with active Pex tubing, with a diameter of 8 mm and a thickness of 1 mm, with an EVOH oxygen barrier according to DIN 4726. The path of the tubes is indicated on the lower face of the panel to allow for drilling holes for fastening with maximum freedom, but without interfering with the hydraulic circuit.

The active 'UP' panel is available in sizes 600x1000mm, 1200x1000mm, and 1200x2000mm. There is also a version for insulation only, for completing non-active ceiling parts. Installed like a regular suspended ceiling, it occupies only 60mm from the floor, if installed flush. Thermal performance is certified according to EN 14240 and EN 14037 standards.